Lead2Amazon

Stylish adjusters for 2x4 wood boards.

A LABRICO series DIY product for renters.

Easy for anyone to install.

Supports 2x4s without scratching your ceiling or floor.

No tools required.Simply turn the jack to fix your 2x4 firmly in place.

Size (W x H x D): 29.5 - 47.2 x 1.3 x 9.3 inches (75 - 120 x 3.3 x 23.5 cm); Shelf Depth: 8.9

Load Capacity: Up to 55.1 lbs (25 kg) at 29.5 inches (75 cm) / Up to 22.0 lbs (10 kg) at 4

Materials: Pipe: Iron, epoxy resin powder coating (resin part) ABS resin, synthetic rubber (screws) iron, plating

No screws or nails, easy to install and remove

Color: White

Labrico Series DIY product for renters.

Dedicated parts for mounting 0.59 - 0.75 in (15 - 19 mm) thick wood to the wall and attaching the nageshi rail.

Easy to install with screws and pins.

The special pin prevent scratches/holes from being visible on your walls.

Load Capacity: 22.1 lbs (10 kg).

Please prepare a Phillips-head screwdriver for installation.

External Dimensions (W x H x D): 15.6 x 27.6 - 41.3 x 5.7 inches (39.5 x 70 - 105 x 14.5 cm); Load Capacity: 11.0 lbs (5 kg); Product Weight: 3.5 lbs (1

Color: White; Easy to install: No tools required. Easy to use, just squeeze the pole and hang the parts

Materials: Posts: Iron, epoxy resin powder coating; Tray: Iron, epoxy resin powder coating; Resin parts: Nylon, EVA (screws) Iron, plated finish

The Spluce series allows you to store your everyday cookware in a clean manner. Organize condiments, wraps, flatware and cutlery with both functionality and appearance

You can add a pole and connect it freely with other trays or baskets (sold separately), etc. The removable parts allow you to mix and match your own preference, so you can use it in a variety of ways

Depth 14.5cm for storing dishes Comes with a convenient drying rack and a dish drainer for storing condiments and wraps

Compatible woods: 2x4 wood; Mounting dimensions: Height up to 108.9 inches (2,750 mm); Wood cutting guide: Prepare wood that is3.0 inches (75 mm) shorter than the ceiling height.

Do not install on upper floor balconies or similar places where there is a possibility of falling or tipping over, as a precaution.

For indoor use only.Not usable in high-temperature areas, outdoors or in direct sunlight, bathrooms or humid places, or where it may get wet.

Material: Main body: Iron, epoxy resin powder coating ; Pad: Synthetic rubber ; Screws: Iron, plating + baked coating

Set Contents: 1 set of adjusters, 4 screws, pad, instruction manual (English language not guaranteed); Load Capacity 44.1 lbs (20 kg) (when load is applied to one side against the pillar); Color: Black

Simple yet rigid design made of iron.Easy to install even for DIY beginners using the Phillips screwdriver and included screws.

The body of the adjuster is painted to resist rust, but it does not completely prevent the occurrence of rust.

A stylish, 2 x 4 Single shelf support.

A Labrico series DIY product for renters.

Easy for anyone to install.

A rest that supports shelf boards.

Bottom hole not required.No marking necessary.

Load Capacity: 22.0 lbs (10 kg) (per pillar); Mounting Dimensions: Height up to 10.8 inches (2750 mm); Color: Off-white

Set Contents: 2 joints, 8 screws, instruction manual (English language not guaranteed)

Material: Resin parts: ABS resin, Screws: Iron, plating

Joint parts for joining two 2x4 wood. You can combine the excess wood to make the best use of wood

Buying long wood is a hard time to carry. If the joint is assumed to be used, you can purchase short wood for use

(Set Contents) Adjuster 1 set (top cap + lower cap), Instruction manual (English language not guaranteed); Working load: 22.0 lbs (1 kg) per pole (*For horizontal mounting); Color: Off-white

Compatible Woods: 1 x 4 Wood; Mounting Dimensions: Vertical Mounting: Height up to 72.8 inches (1,850 mm); For Horizontal Mounting: Width up to 35.4 inches (900 mm); Wood Cutting Guide: Please prepare wood 2.0 inches (50 mm) shorter than the length of the mounting location

Material: Resin parts: ABS resin, synthetic rubber, screws: Iron, plating

DIY parts allow 1x4 wood to be stretched on floor and ceilings to create a variety of DIY basics. No tools required Simply turn the handle to secure 1x4 material

Can be mounted horizontally. Removable when not needed It can also be used to change the life stage and return to the original condition of rental properties

Product Size (W x D x H): 5.9 x 5.9 x 27.2 inches (15 x 15 x 69 cm); Load Capacity: 33.1 lbs (15 kg) per product. Color: Black

Set Contents: Table legs x 1, shelf holder x 1, tapping screws x 6 (includes 1 extra), instruction manual (English language not guaranteed)

Material: Body: Iron, epoxy resin powder coating; Adjuster: Iron, Plating, ABS resin; Screws: Iron, Plating

Commercially available wooden tabletop (0.7 inch (18 mm) thick or larger pine collector) to create your own original table. Purchase the number of products you need according to the size and shape of your favorite tabletop

When assembling, please prepare a Phillips screwdriver, and do work with two or more people

External Dimensions (W x H x D): 7.9 x 5.5 x 10.4 inches (20 x 14 x 26.5 cm); Inner Dimensions (W x H x D): 6.5 x 3.7 x 9.5 x 24.5 cm); Load Capacity: 2.2 lbs (1 kg); Product Weight: 1.1 lbs (0.51 kg)

Color: White; Easy to install: No tools required. Simply insert the bottom plate of the hanging cabinet (0.6 - 1.0 inch (1.5 - 2.5 cm) thick), and screw it on

Material: Body: Iron, epoxy resin powder coating; Non-slip; Silicone resin; Fixing screws: Iron, Plating: EVA resin

The Spluce series allows you to store your everyday cookware in a clean manner. Attach to the bottom of the hanging cupboard in the kitchen to make the most of your space. You can easily increase your kitchen storage without any tools. Anti-scratch silicone and cushioned material for peace of mind

Convenient for storing kitchen gadgets such as wraps, foil, tissues, box shaped kitchen paper