Lead2Amazon

Wide range of uses such as heat shrink packaging, paint drying and bending processing: For processing heat shrink tubes, bending boards and PVC pipes, contracting shrink film, drying thermoset paints and putty, removing paint, glue and seals, removing seals, carpets and scraping deep areas

(A wide variety of nozzle attachments that can be used for a wide range of uses, including a storage case for easy carrying) Set Contents: Main unit (HG-1450A) x 1, Wide nozzle x 1, Spot nozzle x 1, Hook nozzle x 1, Spatula nozzle x 1, Scraper fixing tool x 1, Storage case x 1, Instruction manual x 1

Voltage: AC 100 V, Frequency: 50/60 Hz, Current: (Weak Wind) 7.6 A, (Strong Wind) 14.6 A, Rated Power Consumption: (Weak Wind) 750 W, (Strong Wind) 1,450 W, Hot Air Temperature: (Weak Wind) Approx. 300 °C, (Strong Wind) Approx. 500 °C, Discharge Rate: (Low Wind) Approx. 3555555000 L/min (Strong wind) Approx. 245 L / min / 700 L/min, Air flow change (2 levels) weak / strong wind, body size (L x W x H): Approx. 9.6 x 3.1 x 7.7 inches (245 x 80 x 195 mm), cord length: approx. 6.6 ft (2.0 m), weight (main unit only): approx. 0.6 kg); Rated time: approx

Because it is controlled by a heater, the temperature of the hot air may vary depending on the amount of air and temperature

Country of Origin: China

Purpose: To cut mild steel wire or steel rods, etc.

Maximum Cutting Capacity: Mild steel wire (less than 80HRB) of 0.4 inch (10 mm) diameters

Warning: The cut material and damaged edges may scatter and potentially result in cuts and injuries. During work, wear protective glasses and gloves, and ensure the safety of your surroundings.Do not use on wires with an active current.

Note: Please use within the cutting capacity.Always cut from the middle of blade then towards the back.Avoid cutting or prying with the tip of the blade as it can damage the blade.Do not subject to impact, such as hitting it with a hammer, etc.Before use, please check main body and blades for damage, wear, or defects.

Use: hammer

Hammer: Double-ended

Face: Round

Nominal Size: 7.9 oz (225 g)

Caution: Please wear safety protective equipment and safety glasses. When hitting metal objects, be sure to hit at the center of the striking surface. Hitting can cause injury. Please refrain from using if there are rattles or cracks

For bonding wood, paper, leather, fabric, plastic, metal, and glass

Charging time: Up to 3 hours (empty to full charge)

Compatible glue stick diameter: φ0.3 inches (7.5 mm)

Temperature for use on adhesive parts: Approx. 282°F (130°C)

Preheat time: Approx. 60 seconds

Light source: Visible light semiconductor laser, 635 nm

Output: 1 mW or less, Class 2

Lower light: High-brightness LED

Line width: 0.1 inch (2.5 mm) or less / 16.4 ft (5 m)

Leveling method: Gimbal mechanism (horizontal holding mechanism)

Correction angle: Approx. +/- 4°

Self-leveling time: Approx. 5 seconds

Accuracy: +/- 0.1 inch (3 mm) at 32.8 ft (10 m)

Power supply: 1 AA alkaline battery (1.5 V) (sold separately)

Continuous usage time: Approx. 8 hours (Panasonic alkaline batteries) at 68°F (20°C)

Note: *Pattern appearance may vary depending on the product. Please be aware of

Power Supply: AC 100V, 50/60Hz

Rated power consumption: 10W

Rated usage time: 20 minutes

Nozzle Maximum Temperature: 395°F (165°C)

Cord Length: 4.9 ft (1.4 m)

Accessories: 2 translucent glue sticks (diameter 0.3 x 3.9 inches (7 x 100 mm)

For use with glue sticks in diameters 0.3 - 0.3 inch (7 -

Product Size (W x H x D): Approx. 4.9 x 4.3 x 1.1 inches (125 x 110 x 27 mm)

Product Weight: Approx. 4.6 oz (138 g)

Nominal Size: 1.9 lbs (0.45 kg)

Total Length: Approx. 7.1 inches (180 mm)

Head Length: Approx. 3.1 inches (80 mm)

Weight: Approx. 22.1 oz (640

Short type

Caution: Please wear safety protective equipment and safety glasses. When hitting metal objects, be sure to hit at the center of the striking surface. Hitting can cause injury. Please refrain from using if there are rattles or cracks

Country of Origin: China

Canvas Tool Bag

Size (H x W x D): 16.9 x 9.4 x 4.7 inches (430 x 240 x 12

Product weight: 266g

Drawstring

Material: Canvas

Uses: A platform for sharpening objects using gold sand

Thickness: 0.4 inch (9 mm)

Nominal Size: 2.0 inches (50 mm) (W)

Specifications: Includes holes for fixing

LED lamp life is about 100,000 hours (not battery life)

Replacement batteries: CR2032 x 2

Extendable: Total length approx. 11.2 - 34.3 inches (285 - 875

Note: Do not use in places where there is a risk of contact with electricity

Country of Origin: China