Lead2Amazon

Installation kit for neatly installing the ETC Onboard Car Device.For CY-ET926D only

Stand-alone speech model

Equipped with voice guidance function (English language not guaranteed)

Warning function for when the card is not inserted or forgotten to be removed

History playback function

Speaker & LED built-in antenna

ETC Car Antenna Installation Kit Only for CY-ET2010D/CY-ET926D

Compatible models: CY-ET2010D/CY-ET926D

Product dimensions: W 2.8 x H 0.7 x D 4.1 inches (70 x 19 x 106 mm)

Audio output from ETC side speakers

Can be installed in a console box, driver's seat leg, etc

Single rear view camera

Uses an image sensor that supports HDR (High Dynamic Range)

146° horizontal / 114° vertical wide viewing angle lens for superior visibility

The power circuit of the cable is built into the camera body for improved wiring work

The position of the intermediate connector that connects the main unit to the power cable has been changed to improve the efficiency of port connections.

20P Steering Switch Conversion Harness

Size: 8.3 x 5.2 x 0.6 inches (21.2 x 13.2 x 1.6 cm); Product Weight: 1.3 oz (36.3 g); Model Number: CA-LTS020D

Feels like a concert hall

Produces the original fuel saving performance of your vehicle

Dropped voltage recovers quickly

Idling Stop Long Life

Reduces fuel economy

With the advance of innovation and efficiency, SOLING rear camera can be quickly retracted from the traditional high price structure

Compatible models: For DC 12V vehicles only

Reception Advanced Optical Beacon with Navigation Interlocking ETC 2.0 Car Device

Power supply voltage: DC 12 V. Current consumption: 140 mA

Product dimensions: W 2.8 x H 0.7 x D 4.1 inches (70 x 19 x 106 mm)

Power Cord/Antenna Cord Length: 12.8 ft (3.5 m)

This product is only for four wheelers. Not for use on motorcycles

Power Supply: DC 5 V

Current Consumption: 1 A

Power Consumption: 3.7 W

This drive recorder comes with a parking surveillance function provided by Komtec, the largest manufacturer of dash cams.
High quality enough to supply to automakers as well as complete control system comes with origami

Camera Specifications: Image Sensor: 1/2.7 type CMOS sensors; Number of Effective Pixels: Up to 2 million pixels; Lens Angle: Horizontal 118°, Vertical 59° (Diagonal 150°); F Value: 2.2; Lens Material: Glass

Product specifications 1: Power supply voltage: DC 12 V; Maximum current consumption: less than 400 mA; Operating temperature range: 14°F to 144°F (-10°C to 60°C); Frame rate: 29.1 / 19.1 / 9.1 / 9.1 fps; LED signal protection included

Product specifications 2: GPS: None. Recording media: microSDHC card (included: 8 GB/class 10). *Supports 4 GB to 32 GB. Class 10 is recommended

Product specifications 3: G-sensor: Yes (0.1 - 1.0 G: can be set in 0.1 G); Main unit size: 2.5 x 1.9 x 1.0 inches (63 x 49 x 26.9 mm); Weight: 2.5 oz (70 g)

Product specifications 4: Product warranty period: 1 year (excluding consumables)

Main camera specifications - Image sensors: 1/2.7 type CMOS sensors; Number of effective pixels: Max 2.0 megapixels; Lens angle: horizontal 120°, vertical 60° (diagonal 151°); F value: 2.0; Lens material: glass

Sub camera specifications - Image sensors: 1/4 type CMOS sensors; Number of effective pixels: Max 1.0 megapixels; Lens angle: horizontal 108°, vertical 63° (diagonal 134°); F value: 2.4; Lens material: glass

Product specifications 1 - Power supply voltage: DC 12 V/ 24 V; Maximum current consumption: less than 350 mA in case of normal use / less than 800 mA in case of super capacitor charging; Frame rate: 29 fps LED signal protected

Product specifications 2 - GPS: yes; Recording media: micro SDHC card (included: 16 GB / class 10) compatible with 8 GB - 32 GB, class 10 recommended

Product Specifications 3 - G Sensor: Yes (possible settings: 0.1 G - 1.0 G: 0.1 G)

Accessories: Cigar plug cord 4.36 yd (4 m) x 1, camera connection cable [long] (about 23.6 inches (60 cm)) x 1, camera connection cable [short] (about 4.3 inches (11 cm)) x 1, double-sided tape for fixing main camera mounting bracket x 1, double-sided tape for fixing sub camera mounting bracket x 1, de-greasing cleaner x 1, cord clamp x 1, sticker (HDROP-06) x 1, allen wrench for bracket angle adjustment x 1, micro SDHC card (16 GB/class 10) SD card conversion adapter x 1

Components:

Panel

Connector set (6P/10P)