Lead2Amazon

Labrico Series DIY product for renters.

Dedicated parts for mounting 0.59 - 0.75 in (15 - 19 mm) thick wood to the wall and attaching the nageshi rail.

Easy to install with screws and pins.

The special pin prevent scratches/holes from being visible on your walls.

Load Capacity: 22.1 lbs (10 kg).

Please prepare a Phillips-head screwdriver for installation.

For indoor use only.Not usable in high-temperature areas, outdoors or in direct sunlight, bathrooms or humid places, or where it may get wet.

Load Capacity: When using 2x4 lumber, up to 66.2 lbs (30 kg) per shelf (varies depending on the size of the wood used). When installing multiple shelves, up to a total of 266.2 lbs (120 kg); Installation Dimensions: Shelf length up to 47.2 inches (120 cm) for 2x4 lumber / up to 39.4 inches (100 cm) for 1x4 lumber

Material: Main body: Iron, epoxy resin powder coating; Screws: Iron, plating + baked coating

Set Contents: 2 shelf supports, 8 screws, instruction manual (English language not guaranteed); Color: Black

Simple yet rigid design made of iron.Please prepare a Phillips screwdriver for installation.

Load Capacity: Up to 66.1 lbs (30 kg) per shelf board (when using 2 x 4 materials on shelf). Installation Dimensions: Shelf length is up to 47.2 inches (120 cm), and the number of steps is up to 4 levels

Set Contents: 2 shelf supports, 8 screws, instruction manual (English language not guaranteed); Color: Off-white

Material: Resin parts: ABS resin, Screws: Iron, plating

Shelf holder parts for attaching shelves to wooden posts. After the post is firmly installed, the shelf supports can be installed quickly and scooped to determine the height of the shelf

Neatly designed to not see screws from the front. Use it with the LABROCO adjuster to create a uniform shelf

Load Capacity: Up to 66.1 lbs (30 kg) per shelf. Installation Dimensions: Shelf length is up to 47.2 inches (120 cm), and the number of steps is up to 4 levels

Set Contents: 2 single shelf brackets, 8 screws, instruction manual (English language not guaranteed) Color: Matte black

Material: Resin parts: ABS resin, Screws: Iron, plating

Shelf holder for mounting shelves on 2x4 wood posts. Just determine the mounting height and screw it on. No screw positioning or drilling required

Neatly designed to not see screws from the front. Use it with the LABROCO adjuster to create a uniform shelf

Product Size (W x D x H): 3.5 x 3.5 x 3.5 inches (9 x 9 x 9 cm); Load Capacity: 6.6 lbs (3 kg); Color: Black

Set Contents: Triangle frame, 1 shelf fixing bracket, 4 fixing screws, 12 pins (including spare), 3 pin guides, 3 pin covers, instruction manual (English language not guaranteed)

Material: Body: Iron, epoxy resin powder coating; Resin parts: ABS resin, EVA resin, Pins: Stainless steel, Screws: Iron, Plating, Shelf fixing brackets: Iron, epoxy resin powder coating

Compatible with commercially available 1x4 wood, pine wood, etc. This triangle frame allows you to DIY shelves of your choice of materials and sizes. It will not damage the walls too much, and can be secured with the included pin

The minimalistic design consists of only 3 metal wires, making it easy to match with any decor and can be installed on the top or bottom of the shelf. Enjoy your own personalization

Set Contents: 1 x 4 adjuster support, stapler, instruction manual (English language not guaranteed)

Product Size (W x D x H): 3.6 x 0.4 x 1.2 inches (9.1 x 1 x 3.1 cm); Compatible Products: LABRICO 1x4 adjuster only

Material: Body: EVA resin, Staple: Stainless steel

Support parts to prevent slipping when mounting 1x4 adjuster horizontally to drywall

The compact size makes it difficult to stand out when installed and does not interfere with your overall coordination

Can be used with both 1 x 4 planks and 3.9-inch (100 mm) wide pine. Make your own DIY shelves with your choice of material and size.

Easy to install with screws and pins.

Choose from a wide range in this series.

Shelf brackets to prevent shelves from sliding sideways.

Designed in Japan, made in China.

Load Capacity: 22.0 lbs (10 kg) (per pillar); Mounting Dimensions: Height up to 10.8 inches (2750 mm); Color: Matte Black

Set Contents: 2 joints, 8 screws, instruction manual (English language not guaranteed)

Material: Resin parts: ABS resin, Screws: Iron, plating

Joint parts for joining two 2x4 wood. You can combine the excess wood to make the best use of wood

Buying long wood is a hard time to carry. If the joint is assumed to be used, you can purchase short wood for use

Load Capacity: Up to 66.1 lbs (30 kg) per shelf. Installation Dimensions: Shelf length is up to 47.2 inches (120 cm)

Set Contents: Double shelf bracket, 8 screws, instruction manual (English language not guaranteed) Color: Matte black

Material: Resin parts: ABS resin, Screws: Iron, plating

Shelf holder for mounting shelves on 2x4 wood posts. If you want to have shelves on both sides of the column, you can install this one part

Neat design with no visible screws from the front. Use the adjuster and set to create a uniform shelf

Product Size (W x D x H): 5.9 x 5.9 x 15.2 inches (15 x 15 x 38.5 cm); Load Capacity: 33.1 lbs (15 kg) per item; Color: White

Set Contents: Table legs x 1, shelf holder x 1, tapping screws x 6 (includes 1 extra), instruction manual (English language not guaranteed)

Material: Body: Iron, epoxy resin powder coating; Adjuster: Iron, Plating, ABS resin; Screws: Iron, Plating

Commercially available wooden tabletop (0.7 inch (18 mm) thick or larger pine collector) to create your own original table. Purchase the number of products you need according to the size and shape of your favorite tabletop

When assembling, please prepare a Phillips screwdriver, and do work with two or more people