Lead2Amazon

Please be aware that counterfeit products are present

Prevents secondary accidents during emergency stops. This product can be used in car inspections instead of a fire starting cylinder. There is no shelf life and can be used repeatedly by replacing batteries. Powerful luminescence that can be seen at night from approximately 666.6 ft (200 m). About 8 hours of continuous use (with new alkaline batteries). The switch shape makes it easy to intuitively operate even in emergencies. It comes with a magnet so you can install it from your car

1.7 times brighter than previous models and better looking (based on our research). Compliant with vehicle inspections, Japanese Ministry of Land, Infrastructure, Transport and Tourism safety standards, security standard modification, internal protrusion (UN-R21) compliant product, splashproof specifications equivalent to IPX3

The operation of the switch is strictly set to prevent misoperation by passengers (especially children)

Specifications:

LEDs: 9 high brightness LEDs, Emitting color: red (flashing), bottom magnet included, can be attached to the flame starter holder with a diameter of 1.1 inches (27 mm)

Continuous Usage Time: Approx. 8 hours (when using new alkaline batteries); Battery: 2 x AAA alkaline batteries (sold separately) and test batteries included

The red LED flashes brightly to notify you of danger from 200 meters at night

Note: Rechargeable batteries cannot be used. Always use new AAA alkaline batteries. Please be aware that counterfeit products are present

You cannot ride with this product attached to your vehicle

This product is compliant with Road Traffic Law enforcement rules that can be installed instead of a triangular display board during an emergency stop on highway. A safe viewing distance of approximately 266.4 ft (800 m) at night, from approximately 988.4 ft (300 m) during the day to notify you of your presence with a strong luminosity (*Depending on the remaining battery level and road environment). ◆ The bottom is magnetic, so it can be safely installed from the car to the roof. Silicone waterproof cover prevents car from scratching Compact size that can be stored around the driver's seat of a car, under the seat of a motorcycle. Battery-operated storage without cords or plug accessories

Comes with a waterproof cover that can handle troubles in rainy weather. ◆ Continuous use in about 5 hours of continuous use and will flash firmly from trouble to after-mortem processing (*When using new alkaline batteries)

Battery Handling Instructions: Please check periodically for any abnormalities in the battery leakage or LED flashing operation to ensure it can be used in an emergency. Please replace batteries with new batteries after use or 2 years. When replacing batteries, please replace all 4 new ones. Recommended usage time for batteries. Please do not use batteries that have been expired

Specifications: LED: 3W Power LED x 3 Lights; Emitting Color: Purple; Continuous Use: Approx. 5 hours (when using new alkaline batteries); Batteries: 4 x AAA alkaline batteries (sold separately); Magnet on the bottom is included; Waterproof cover included

Material: Body: ABS; Waterproof Cover: Silicone rubber; Lens: PMMA

【Please check before purchase】

The product has a strong magnet on the bottom. Magnets may damage the body

Batteries not included. Make sure to prepare 4 new AAA alkaline batteries (sold separately)

Wheel chock when parked or jacked up Light and strong resin tire stopper. Adopts a yellow color that makes it very visible from later vehicles. Reflective rope included for nighttime visibility

This product is only an assistant. This product cannot support a car alone

Suitable for light and 4t vehicles

(Material with no unpleasant smell, excellent weather resistance) Made of polypropylene, so you won't have to worry about the smell even in the car. Weather resistant polypropylene resists deterioration even when used outdoors

Convenient to Carry: Comes with a rope for easy carrying. The rope is made of reflective material that makes it stand out at night

Specifications:

Size: 3.6 x 5.7 x 3.1 inches (91 x 145

Quantity: 2

Material: Polypropylene

【Before purchase】

For daily inspection of tire pressure. Air leak-proof mechanism allows for accurate measurements without leaking air during measurement

Comes with a hose so you can measure the air pressure at hand regardless of where the valve is located. Decompression is possible

Suitable for a wide range of occasions, from daily maintenance to sports driving

Impact Resistant: Comes with a cover that protects against impacts, and the material is made of flexible tpe. Includes a soft case to protect against impact during storage

Easy to measure: Uses an air leak-proof mechanism (Patent No. 6081644). Simple and easy to read surface Comes with measurement retention function. Comes with air adjustment (decompression) function. 360 degree rotating base

Specifications:

Hose Length: Approx. 16.9 inches (430 mm), Gauge Diameter: Φ 2.0 inches (51 mm), Maximum Measurement Value: 500 kPa, Accuracy: ±10 kPa, Air Pressure Unit: 1 kgf/cm² = 100 kPa

Split type for compact car use. Includes storage case. Make changing tires quick and easy

Socket Size: 0.7 inch (17 mm) / 0.7 inch (19 mm) / Handlebar Size: Approx. 14.7 inch (373 mm) / Grip Size: Approx. 9.8 inch (250 mm) (insertion angle 0.5 inch (12.7 mm) / Dedicated Case Size: 15.7 inches (40 mm) x 3.6 inches (40 inches (40

Quick and easy tire replacement: The handle and grip position can be changed to a power wrench or cross wrench

Power Wrench: Easily loosen the nut with about half the force of a cross wrench

Cross Wrench: The rotating mechanism of the grip allows the nut to be removed smoothly. The handle and grip have a ball for smooth shaping

Can be used with handheld sockets:

The socket insertion angle is 0.5 inch (12.7 mm) in size, so it can be used with your own socket

Compatible with aluminum wheels

Includes 3 types of sockets. Thin mouth shape is compatible with aluminum wheels

Specifications:

Reduces wind noise between the front and rear doors Fill the gap between the front and rear doors to prevent wind from entering Easy to clip on the door edge No special tools required for installation with just scissors

Product Number: 4951 (Package Specifications of Amon 2652)

Specifications:

Size: Approx. 8.3 ft (2.1

Quantity: 1 (2 doors)

Usable temperature range: -4 to 244°F (-20 to 120°C)

Material:

EPDM

【Before purchase】

Please make sure that the factory molding is not attached. Not for use on 2-door cars, minivans and light vehicles with electric sliding doors

Protects car memory with 8 AA batteries (sold separately)

Product Number: 4977 (Package Specifications of Amon 8864)

Strong wide teeth hold the battery terminals securely in either portrait or landscape orientation

Comes with a hook to prevent falling off for peace of mind. Compatible with a wide range of vehicles

Temporarily supply electricity to vehicle instead of battery when replacing batteries. Prevents your watch, fuel economy, car navigation system memory from resetting

Note: Please be careful not to contact positive or negative devices with the alligator clip that holds the battery terminal. It may damage the built-in fuse

Specifications:

For DC 12 V cars; Cord Length: Approx. 27.6 inches (70 cm); Uses 8 AA batteries (sold separately)

Clips that hold securely and won't fall off (clip opening: MAX 1.0 inch (25 mm)), Includes a hook for hanging in the engine compartment

Tube fuse: 1A (built-in diode with backflow prevention function)

Reduces wind noise near the hood. Fill gaps in the hood and body to prevent wind from entering. Easy to apply around the hood

Specifications:

Size: Approx. 9.8 ft (3 m), Quantity: 1 piece, double-sided tape included

Usable temperature range: -4 to 244°F (-20 to 120°C)

Material:

Main unit (EPDM), double-sided tape (base material: acrylic foam, adhesive: acrylic adhesive)

Only a pair of scissors is used

Product Number: 4952 (Package Specifications of Amon 2658)

Improves adhesion to the door and body and reduces wind noise

Specifications:

Size: Length: 16.9 ft (4.3 m), Thickness: Approx. 0.2 inch (5 mm), Width: Approx. 0.6 inch (15 mm)

Material: Body: EPDM / Adhesive: Acrylic adhesive

Quantity: 2 pieces

Operating Temperature Range: -4°F to 244°F (-20°C to 120°C)

Do not use on sliding doors

Specifications:

Uses high strength line: Approx. 11.8 inches (30 cm)

Spare line included: Approx. 19.7 inches (50 cm)

Country of Origin: Vietnam