Lead2Amazon

Please be aware that counterfeit products are present

Prevents secondary accidents during emergency stops. This product can be used in car inspections instead of a fire starting cylinder. There is no shelf life and can be used repeatedly by replacing batteries. Powerful luminescence that can be seen at night from approximately 666.6 ft (200 m). About 8 hours of continuous use (with new alkaline batteries). The switch shape makes it easy to intuitively operate even in emergencies. It comes with a magnet so you can install it from your car

1.7 times brighter than previous models and better looking (based on our research). Compliant with vehicle inspections, Japanese Ministry of Land, Infrastructure, Transport and Tourism safety standards, security standard modification, internal protrusion (UN-R21) compliant product, splashproof specifications equivalent to IPX3

The operation of the switch is strictly set to prevent misoperation by passengers (especially children)

Specifications:

LEDs: 9 high brightness LEDs, Emitting color: red (flashing), bottom magnet included, can be attached to the flame starter holder with a diameter of 1.1 inches (27 mm)

Continuous Usage Time: Approx. 8 hours (when using new alkaline batteries); Battery: 2 x AAA alkaline batteries (sold separately) and test batteries included

The red LED flashes brightly to notify you of danger from 200 meters at night

Note: Rechargeable batteries cannot be used. Always use new AAA alkaline batteries. Please be aware that counterfeit products are present

You cannot ride with this product attached to your vehicle

This product is compliant with Road Traffic Law enforcement rules that can be installed instead of a triangular display board during an emergency stop on highway. A safe viewing distance of approximately 266.4 ft (800 m) at night, from approximately 988.4 ft (300 m) during the day to notify you of your presence with a strong luminosity (*Depending on the remaining battery level and road environment). ◆ The bottom is magnetic, so it can be safely installed from the car to the roof. Silicone waterproof cover prevents car from scratching Compact size that can be stored around the driver's seat of a car, under the seat of a motorcycle. Battery-operated storage without cords or plug accessories

Comes with a waterproof cover that can handle troubles in rainy weather. ◆ Continuous use in about 5 hours of continuous use and will flash firmly from trouble to after-mortem processing (*When using new alkaline batteries)

Battery Handling Instructions: Please check periodically for any abnormalities in the battery leakage or LED flashing operation to ensure it can be used in an emergency. Please replace batteries with new batteries after use or 2 years. When replacing batteries, please replace all 4 new ones. Recommended usage time for batteries. Please do not use batteries that have been expired

Specifications: LED: 3W Power LED x 3 Lights; Emitting Color: Purple; Continuous Use: Approx. 5 hours (when using new alkaline batteries); Batteries: 4 x AAA alkaline batteries (sold separately); Magnet on the bottom is included; Waterproof cover included

Material: Body: ABS; Waterproof Cover: Silicone rubber; Lens: PMMA

【Please check before purchase】

The product has a strong magnet on the bottom. Magnets may damage the body

Batteries not included. Make sure to prepare 4 new AAA alkaline batteries (sold separately)

Type: Liquid; Contents: 0.3 fl oz (8 ml) x 1; Product Size: H 2.8 x W 0.7 x D 0.7 inches (70 x 18 x 18 mm)

How to use: This product is a one-time type. Please do not reuse any revival, coating agent, or sponge. 1. Rinse the resin part with water, remove sand and dust, and dry thoroughly. 2. Apply an appropriate amount of liquid to the soft surface of the sponge included and evenly apply it. Note: Please be careful that the inner plug may come off if you press it firmly. 3. Wipe with the included cloth. [Reference] If the resin is insufficient or uneven coatings, please do 2 again and repeatedly

Carmate C136 Black Resin Resurrection Agent, 6 Months Durable, Premium Coat

Carmate C136 Black Resin Resurrection, Premium Coat, Resin, Car Wash, Care Supplies, Aging, Restores Color and Shine of White Parts, Resin, Whitening, Revival, 3-step Installation for a Clean Finish

Unpainted plastic parts of cars will become whitening due to the effects of UV rays, etc. The color and luster of resin parts that have become white (unpainted) will revive. Black Resin Resurrection: Super Durable Silane-based Coating for over 6 months of durability and a coating of black resin resurrection

Restores the color and luster of a new car to the deterioration of the resin parts used for car wipers, grills, and bumpers. It can also be used as a coating to prevent deterioration of black resin parts when used on new vehicles

Repair: Super adherent AMS ingredient, adheres to fine scratches on the resin surface, and restores the deep color and luster of the worn-out Samurai historic surface! Repair resin surface

Anti-deterioration Silane-based coating forms an ultra-durable film on repaired resin surfaces. Resin color and gloss last for over 6 months

Uses denatured silicone with high adhesion to resin

The silane coating will last for over 6 months

Power out your drive recorder, car navigation, car purifier, radar detector. The power can be removed from the fuse box. Includes fuse power supply cord for power removal without wiring processing. Power socket with locking mechanism that prevents the plug from falling out even when driving vibrations. The curved surface shape is easy to apply force

Cannot be used on vehicles with claws that lock fuse

Product Number: 4957 (Amon 1542 limited product)

[Specifications] Replaceable Fuse: 15A (compatible with all flat and mini flat and low length); Usable Power: DC 12V - 60W or less / DC 24V - 60W or less / Cord Size: 0.75 sq equivalent - approx. 6.6 ft (2 m) with a hole-type terminal 6 φ 5 A built-in tube fuse (if used for 24 V vehicles)

Features: Includes locking mechanism that prevents the plug from coming loose. Flat and gentle curved surfaces for added strength

(Before Purchasing) It cannot convert DC 12V to DC 24V and DC 24V to DC 12V

Please be sure to connect the negative cord (body ground)

Replace the tube fuse suitable for the capacity of the appliance installed

Not water resistant Cigar lighter cannot be used

Due to the shape of the plug you connect, it may not be able to use it

T16/T15 Explosive High Power LED Bulb: Equipped with 9 super bright SMD3030 LEDs that can illuminate in all 360° directions.2,000 LM ultra-bright, with a brightness of a headlight, it can illuminate a wider area of the rear of the vehicle and greatly improve safety.*This product is exclusively for 12V vehicles

Long Life & Outstanding Heat Dissipation: Adopts a built-in NTC temperature sensor and high heat conduction 6063 aluminum material to maximize the heat dissipation effect of this product.It reduces the amount of heat generation, does not put load on the light’s body, has a lifespan of 50,000 hours, and can be used for 136 years even if it is lit one hour per day

Built-in Canceler: The built-in Canbus canceler improves compatibility with sockets, and is compatible with a wide range of vehicles without poor contact or looseness.Compatible Sockets: T16, T15, 912, 921, 906, 904, 902, W16W

Non-polar & Easy to Use: It’s almost the same size as the T16/T15 genuine bulb. Its terminal has a non-polar design, so you don’t need to worry about the +ve or -ve poles, and can easily replace the original bulb

Brand Name: Sealight (Registration No. 6078354)This product is sold exclusively by "Sealight-JP" (Please check the store name above when placing your order).

Wheel chock when parked or jacked up Light and strong resin tire stopper. Adopts a yellow color that makes it very visible from later vehicles. Reflective rope included for nighttime visibility

This product is only an assistant. This product cannot support a car alone

Suitable for light and 4t vehicles

(Material with no unpleasant smell, excellent weather resistance) Made of polypropylene, so you won't have to worry about the smell even in the car. Weather resistant polypropylene resists deterioration even when used outdoors

Convenient to Carry: Comes with a rope for easy carrying. The rope is made of reflective material that makes it stand out at night

Specifications:

Size: 3.6 x 5.7 x 3.1 inches (91 x 145

Quantity: 2

Material: Polypropylene

【Before purchase】

Free replacement will be made within 10 days after purchase, such as mistakes in paste or weak adhesive strength

We do not guarantee the operation of the car navigation system that is not listed in the model number. Be sure to check the specifications of the double-sided tape and the specifications of your terminal

If there are problems such as missing accessories or damage to the product, please contact us and we will exchange it for you

After receiving the product, please be sure to open it and check the contents of the item if it is insufficient, please contact us

The film antennas are overlap, so there may be cases where you see one piece. Please open it before checking it

The packaging is not a decorative box, but it is simple packaged, so the exterior may have wrinkles or breaks

If you work in a car with high temperatures, the adhesive strength of the double-sided tape will decrease, so please lower the temperature of the car inside the car

L type 2 left and 2 right pieces high sensitivity film antenna that supports terrestrial digital (full seg)

Compatible with 1 seg, full seg, FM frequencies, and the thickness of 0.004 inch (0.1 mm) will not interfere with driving

Compatible Manufacturer: Carrozzeria, Panasonic, Pioneer, Strada, Alpine, Kenwood, Clarion, etc. Compatible with Carrozzeria, Panasonic, Pioneer, Strada, Alpine, Kenwood, Clarion, etc

Coated steel wire: Uses flexible material that allows you to freely change angles

Wire loop: Original design allows for smooth passing through narrow places

Sufficient size for wiring to distant areas

Convenient for pulling wiring through for a rear camera or dash cam, or when there is distance from a power supply to electrical components

Specifications:

Total length: 39.4 inches (100 cm)

Flex material and original design

Materials:

Wire: Core: Annealed iron wire; Coating: Vinyl chloride. Wire rope: Core: Stainless steel; Coating: Nylon 12

Part Number: 4931 (amon package number 1161)

✔ [New U-PATAN Anti-collision Door Molle with 2022 Double Sided Tape] This product is a 2022 version car anti-collision door mold that has been upgraded to meet the demands of most customers. Unlike other products on the market, this product does not require double-sided tape, and it is very convenient to operate by following the instruction manual (English language not guaranteed)

✔ (High Quality Polymer Rubber Material Protects Your Car) Maggie gift edge protector is made of polymer rubber material, and includes aluminum alloy steel in the rubber to further protect your beloved car. Even if you open the door in tight spaces, it will not cause scratches and protect your opponent's cars from being scratched

✔【Effectively Blocks Some Noises】Have you ever felt a little wind noise when you drive? Therefore, most doors were not completely closed. It is prone to wind noise. If you install a car door mall like this, you can reduce the gap between the door and the door. In this way, it effectively blocks wind noise and provides a silent effect

Convenient Installation with Japanese Instruction Manual: Unlike other products that require glue in the market, our products are easy to install and install. No glue needed. Just push it to connect it securely. In addition, it comes with a specialist Japanese instruction manual that can be cut to the length you want

✔【Wide range of uses, high quality after-sales service】The length of this product is 16.4 ft (5 m) and is suitable for all vehicles. For example, door edges, engine covers, after-sale covers, furniture edges, etc. If you have any problems with your purchase or handling, please contact us at any time. We will reply within 24 hours

Bottle shape trash can is shaped to fit the car door drink holder

The body is made of soft resin elastomer for a comfortable texture

The door part is especially large, so it is easy to roll with simple plastic materials, and it will cause interference between plastic such as rattling. This product also reduces noise of interference and allows for a more stress-free drive

Uses a resin lid for easy disposal

Carbon-tone pattern on the surface for enhanced texture