Speaker rear side damping and sound absorbing material (approx. 180 × 180 mm/thickness approx. 25 mm … 2), soundproofing tape for speakers (approx. 20 × 600 mm/thickness approx. 30 mm … 2)
Point damping material (approx. 50 × 100 mm/thickness approx. 2 mm … 10), spatula for damping material crimping (total length 170 mm … 1), lining peeler (total length approx. 210 mm … 1)
Reduces wind noise between the front and rear doors Fill the gap between the front and rear doors to prevent wind from entering Easy to clip on the door edge No special tools required for installation with just scissors
Product Number: 4951 (Package Specifications of Amon 2652)
Specifications:
Size: Approx. 8.3 ft (2.1
Quantity: 1 (2 doors)
Usable temperature range: -4 to 244°F (-20 to 120°C)
Material:
EPDM
【Before purchase】
Please make sure that the factory molding is not attached. Not for use on 2-door cars, minivans and light vehicles with electric sliding doors
Protects car memory with 8 AA batteries (sold separately)
Product Number: 4977 (Package Specifications of Amon 8864)
Strong wide teeth hold the battery terminals securely in either portrait or landscape orientation
Comes with a hook to prevent falling off for peace of mind. Compatible with a wide range of vehicles
Temporarily supply electricity to vehicle instead of battery when replacing batteries. Prevents your watch, fuel economy, car navigation system memory from resetting
Note: Please be careful not to contact positive or negative devices with the alligator clip that holds the battery terminal. It may damage the built-in fuse
Specifications:
For DC 12 V cars; Cord Length: Approx. 27.6 inches (70 cm); Uses 8 AA batteries (sold separately)
Clips that hold securely and won't fall off (clip opening: MAX 1.0 inch (25 mm)), Includes a hook for hanging in the engine compartment
Tube fuse: 1A (built-in diode with backflow prevention function)
2-way cap with integrated nozzle, no need to worry about losing the nozzle. Easy to use by hand and spray as is
Cleans automotive brake equipment bearings (cleaning parts of disc brakes and drum brakes. Cleaning for wheel cylinder disassembly maintenance. )
Cleaning oil and oil adhered to machine parts (degreasing gears, bearings, wires, etc. Washing machine chain, bike chain (including seal chain), bicycle chain )
The spray type is also available in 2 types, including a wide range of spray and a powerful spray
Organic Solvent Poisoning Prevention Regulations Not Applicable
For removing power from portable navigation systems, radar detectors, dash cams, and more. Simply plug the 15A low profile fuse in the fuse box and remove the power supply
Product Number: 4941 (Package Specifications of Amon E578)
Power supply for frequently used electrical appliances such as ETC car devices and rear cameras. In addition, it is an essential item for automobile DIY customization and tuning for automobiles such as tachometers, hydraulic meters, oil thermometers, water thermometers, and voltmeters
Specifications:
Replacement for 15A fuse; Working current: 5A
Cord Size: Equivalent to 0.75sq
Usable Power: DC 12 V, 60 W or less; DC 24 V, 120 W or less; Tube fuse (5 A) included
【Before purchase】
Please check the shape of the fuse you are replacing amperage
Cannot be used on vehicles with a fuse box that locks the fuse
This is a must-have for when you’re replacing batteries.The “Memory Keeper” includes a digital clock, navigation destination points, radio and other settings to prevent memory loss.
This product can provide power while you’re replacing your car battery so the clock, navigation, audio and other memory equipment in your car are protected.
Use the OBDII/OBD2 connector to connect to your vehicle.Easy and reliable to use without interfering with battery replacement work.
Equipped with 3 easy-to-read LED indicators, so you can be sure of the operating status of the product, and replace the battery with confidence.
Requires 6 AAA alkaline batteries.
A must-have for when you’re replacing batteries.
OBDII connector connection for easy and reliable power supply. (This product can only be used on vehicles equipped with OBDII connector registered first in Japan after January 2006.--
Includes 3 LED indicators to check operating status.
Eco-packaging (white box) specifications:
This item is to prevent your car clock, audio, navigation settings, computer, etc. from resetting when you remove your car battery to replace it.