Lead2Amazon

Small Cutting Machine

Electric and hydraulic tools

2016 Orange Book Panasonic Tool Accessory Page

Panasonic Tool Accessories

Panasonic Eco Solutions

EZ0L81 Panasonic Electric Tool Charging Impact Driver Rapid Charger (Lithium Ion Battery Only)

Luminous Flux: Approx. 1,500 lm

Product Size: Width 3.8 x Depth 5.1 x Height 14.2 inches (9.6 x 13 x 36.2 cm); Weight: 1.3

Lighting Mode: Switch between 3 levels of brightness (High=100%, Medium=50%, Low=10%)

Luminous Flux: Approx. 1,500 lumens

Angle adjustment: open and close = 0 ~ 90 degrees (7 positions in 15 degrees), rotations/minute = 0 ~ 270 degrees (free rotation / minute without knuring)

Angle adjustments: Open and close, Angle = 0 - 180 degrees (snaps into 7 different angles), Rotation angle = 0 - 270 degrees (free rotation without snap ins)

Handle: Rotation angle: 0 - 360 degrees (integrated hook rotates 90 degrees)

Lighting modes: Switches between 3 levels of brightness, Strong: 100%, Medium: Approx. 50%, Weak: Approx. 10%

Luminous flux: Approx. 750 lumens, Illumination: Approx. 1500 lux for 15.7 inches (40 cm) with distance measured perpendicular from light source)

Made in China

Product size (W x D x H): 6.4 x 2.8 x 3.9 inches (16.2 x 7 x 9.9 cm) // Weight: 0.8 lb (0.38 kg)

Total luminous flux: 750 lumens

Set Includes: Square hole cutter genuine stone blade

Number of Vibrations: 18 V = 6,000 - 20,000 rpm, 14.4 V = 6,000 - 18,000 rpm

Product Size: Width 10.0 x Depth 2.8 x Height 3.9 inches (25.4 x 7.2 x 9.9 cm); Weight: 0.04 oz

Accessories: Blade for wood, metal

Vibration angle: 3°

Vibration number setting: stepless dial

Country of Manufacture: Body: China; Battery Pack: Japan; Charger: China.

Chuck: One-touch bit lock system (stepped dimensions of 0.35, 0.45, 0.51 inches (9, 11.5, 13 mm)).

Maximum Torque: High Speed: 17.7 in-lbs (2.0 N·m); Low Speed: 53.1 in-lbs (6.0 N·m).

Number of Revolutions: High Speed: 900 RPM; Low Speed: 300 RPM.

Clutch Operating Torque: 21 settings (approx. 0.3–4.0 N·m [3–41 kgf/cm] in increments of approx. 0.19 N·m [1.9 kgf/cm]).

Screw Tightening: High mode: For small screws, iron (M4×0.4 in (10 mm) with spring washer), approximately 2,300 pieces; Low mode: For small screws, iron (M5×0.3 in (8 mm), approximately 1,800 pieces. High mode: For wood screws, spruce (φ0.13x0.8 in/φ3.5×20 mm), approximately 310 pieces; Low mode: For coarse thread, spruce (φ0.15x1.0 in /φ3.8×25 mm), approximately 270 pieces; Low mode: For Tek screws, iron (φ0.16x0.5 in/φ4×13mm, plate thickness 0.03 in/0.8mm), approximately 140 pieces.

Drilling: Low mode: For woodwork, plywood panels (φ0.6 x 0.5 in/15 x 12 mm), approximately 55 holes; For metalwork, iron (φ0.2 x 0.03 in/φ6 x 0.8 mm), approximately 60 holes.

Maximum tightening torque: Impact: (18V) 99.6 ft lbs (135 N m) (14.4V) 84.8 ft lbs (115 N m), Drill High: (18V) 7.4 ft lbs (10 N m) (14.4V) 6.6 ft lbs (9 N m), Drill Low: (18V) Low Drill (18V) 20.7 ft lbs (28 N m) (14.4V) 19.2 ft lbs (26 N m).

Product Size (W x D x H): 7.8 x 2.4 x 7.5 inches (19.8 x 6.1 x 19 cm); Weight: 2.6 lbs (1.2 kg).

Rotational speed (rotations/minutes): (Impact mode): 18V = 0-2,300/14.4V = 0-1,850, (Drill high mode) 18V = 180-1200/14.4V = 145-980, (Drill low mode) 18V = 60-380/14.4V = 50-380.

Number of beats (beats/minute): (Impact mode): 18 V 5.0 Ah = 0 - 3,500 / 18 V 3.0 Ah = 0 - 3,400 / 14.4 V 5.0 Ah = 0-3,000.

Clutch: Drill driver mode = 21 levels.

Country of manufacture: China.

Number of Blades: 24

Maximum Rotational Speed: 6,000 rpm

Country of manufacture: Body: China; Battery pack: Japan; Charger: China

Chuck: One-touch bit lock type (stepped dimensions of 0.45, 0.51 inches (11.5, 13 mm))

Maximum torque: 18.5 ft-lbs (25 Nm)

Rotational speed: 0 - 2300 RPM

Vibration triaxial composite value: 20.3 ft/s2 (6.2 m/s2)

Screw tightening capacity (estimate, when the LED is turned off on a full charge): Course thread in Douglas fir: (φ3.8 x 25 mm) = approximately 220 pieces; Wood screws in Douglas fir: (φ4.1 x 25 mm) = approximately 120 pieces; Texture screws in iron: (φ4 x 13 mm, plate thickness 0.8 mm)) = approximately 310 pieces

Bolt tightening capacity (estimate, when the LED is turned off on a full charge): Bolt (M8 x 25 mm, plate thickness 0.4 inch (10 mm), normal bolts) = approximately 260 pieces; Bolt (M6 x 25 mm, plate thickness 0.4 inch (10 mm), high strength bolts) = approximately 190 pieces