Lead2Amazon

Suitable for: Wood cutting

Voltage: Single-phase AC 100 V

Current: 15 A

Frequency: 50/ 60 Hz

Power Consumption: 1470 W

Rotation speed: 4,000 rpm

(Main body) Size (W x H x D): 28.3 x 18.5 x 25.2 inches (72 x 47 x 64 cm); Weight: 36.4 lb (16.5 kg)

(Table) Size (W x D): 39.4 x 22.4 inches (100 x 57 cm, when extended)

Rated Operating Time: 30 minutes

Insulation: Double insulation

Small Cutting Machine

Electric and hydraulic tools

2016 Orange Book Panasonic Tool Accessory Page

Panasonic Tool Accessories

Panasonic Eco Solutions

Outer Diameter: 4.1 inches (105 mm), Hole Diameter: 0.6 inches (15 mm)

Cutting Capacity: Granite (hardness 38.5 HBS); Thickness: 0.6 inch (15 mm) / Approx. 59.2 ft (18 m)

Compatible tools: For disc grinders

For cutting and grooving mortar, concrete, brick, tile slate, etc

Sharp first

Number of Vibrations: 18 V = 6,000 - 20,000 rpm, 14.4 V = 6,000 - 18,000 rpm

Product Size: Width 10.0 x Depth 2.8 x Height 3.9 inches (25.4 x 7.2 x 9.9 cm); Weight: 0.04 oz

Accessories: Blade for wood, metal

Vibration angle: 3°

Vibration number setting: stepless dial

Even with high power, it can be cut fast. Excellent cutting ability makes your work easier. 2 types of blades for a variety of uses; Woodworking blades: Woodworking (pruning), synthetic resin, iron steel blades, soft iron, non-ferrous (aluminum, copper)

The blade is easy to put on and take off by loosening the ring. The guide plate can also be adjusted with a touch of a touch to adjust the position of the plate by pressing the lock switch. Can also be used with commercial blades. You can use blades that meet the following requirements. For regular reciprocating saws, for saver saws, board thickness less than 0.02 - 0.05 inch (0.6 - 1.3 mm), width 0.5 inch (12.6 mm). *Cannot cut materials that exceed the maximum cutting capacity of this product. Using a commercially available blade may result in less than the maximum cutting capacity of this product

Lightweight & cordless weight: Approx. 4.4 lbs (2.0 kg). You can hold it with one hand, and you can even use it to get out of the way. You can work anywhere! Lightweight so you can use it for a long time without getting tired. Also recommended for cutting high places. Continuous operating time: Approx. 20 minutes (when not loaded)

Fast Charging: Approx. 60 minutes and 60 minutes to complete charge! When you feel it, you can use it without wait. Even if there is a remaining battery, it can be recharged continuously. Save time on charging

Maximum cutting capacity estimate; Wood (thickness): Approx. 2.2 inches (55 mm) mild iron pipe: Approx. 1.3 inches (32 mm) (plate thickness: 0.04 inches (1 mm)); Mild steel material (thickness): Approx. 0.1 inches (2.5 mm). Depending on working conditions, such as the type of processed goods and blade sharpness

Product Size: Width 7.8 x Depth 14.6 x Height 9.4 inches (19.9 x

Weight: 6.1 lbs (2.9 kg)

Blade Circumference (without load): 1 (low speed) = 120 m/min, 2 (medium speed) = 140 m/min, 3 (high speed) = 162 m/min

Blade dimensions: Perimeter 28.7 x 0.5 x 0.02 inches (730 x 13 x

Maximum cutting capacity (depending on the cutting of the material): Round pipe = Diameter 2.4 inches (60.5 mm), Square pipe = 2.2 x 2.5 inches (56 x 63.5 mm)

Capacity (when fully charged): Conduit E25 = 600 pieces, Conduit G42 = 90 pieces (when using 18 V 5.0 Ah)

Accessories: Poohand saw genuine blade EZ9SXMJ4 (1 piece)

Rated power consumption: 1,050 W

Rated time: 30 minutes

Rotational Speed: 5,000 min

Table rotation range: 0-45 degrees left and right

Chip Saw Tilt Range: 45° Left, 0° Right

Compatible chip saw: Outer diameter 7.5 inches (190 mm) x hole diameter 0.8 inches (20 mm)

Vice Vise Post

Hex Key Wrench: 0.1, 0.2, 0.3 inches (3, 5,

Carbon Brush

Electricity Consumption: 90W; Current Consumed: 1.0A

Rotations without Load: 1500 or 1600 per minutes (50/60 Hz)

Stroke Width: 0.7 in (18 mm); Maximum Cut Thickness: 2.0 in (50 mm)

Throat Depth:

Table Angle of Inclination: 45°

Main Unit Dimensions: Approx. total length 24.8 in x width 9.8 in x height 12.8 in (630 x 250 x 325 mm)

Unit Weight: Approx. 24.3 lbs (11 kg)

Electrical Cord: 6.6 ft (2.0 m)

Product Size (without saw blade): Length 12.8 inches (32.7 cm) x Width 6.7 inches (17.1 cm) x Height 8.7 inches (22.0 cm); Product Size (including rechargeable battery): Approx. 5.5 lbs (2.5 kg)

Saw Blade Dimensions: Outer 5.5 x Inner Diameter 0.8 inches (14.0 x 2.0 cm)

Maximum cutting depth 90 degrees (when cut right angle): 1.6 inches (40 mm), 45 degrees (when inclined): 1.1 inches (27 mm); Rotation speed: 4,300 per minute; Continuous operation time (non-load): Approximately 52 minutes

Rechargeable battery specifications: Type: Lithium ion secondary battery; Rated voltage: DC 18 V

Capacity: 2,000 mAh; Operating Temperature: 0 - 40 °C (Charging: 5 - 35 °C)

Charger Specifications: Input: AC 100 V, 50/60 Hz; Output: DC 20 V, 2 A; Charging Time: Approx. 60 minutes

About Commercial Saw Blades: Can be used with wood saw blades for use with 4.9 - 5.5 inches (125 - 140 mm) outer diameter x 0.8 inches (20 mm). Rechargeable battery (sold separately): DBL1820

Dustproof/ Waterproof Rating: IP56

Rotation Torque: 18 V = 6.7 N·m {68 kgf·cm}, 14.4 V = 5.4 N·m {55 kgf·cm}

Rotation Speed: 18V = 0 - 4,500 RPM (rotations per minute), 14.4 V = 0 - 3,600 RPM.

Cutting depth: 0 - 1.8 inches (0 - 46 mm) (only for right angle cutting)

Product Dimensions / Weight: 18 V = Total Length 13.5 x Height 9.0 x Total Width 6.3 inches (343 x 228 x 160 mm); 6.1 lbs (2.75 kg); 14.4 V = Total Length 13.2 x Height 9.0 x Width 6.3 inches (336 x 228 x 160 mm); 5.7 lbs (2.6 kg) (with battery pack)

This listing is only for the main productBattery pack and charger not included