Lead2Amazon

For woodworking: Hinge mounting, groove adjusting, etc.

Set includes: 3 chisels // Chisel sizes: 0.35 inches (9 mm), 0.59 inches (15 mm), 0.94 inches (24 mm)

Uses: Cutting wood, plastic, bamboo, and general metal

Cutting Capacity: Wood: 2.2 inches (55 mm), PVC Pipe: 2.4 inches (60 mm), Soft Iron Pipe: 1.3 inches (32 mm), Soft Iron Material: 0.1 inch (2.5 mm) Thick

Stepless speed Trigger strength adjusts blade stroke speed

Country of Origin: China

Set Includes: Electric saw x 1, Woodworking blade x 1, PVC / PC blade x 1, Ironworking blade x 1, Allen bar wrench x 1

Power cord length: approx. 6.6 ft (2

Rated time: 30 minutes

Cut with chip saw, so the cutting surface is clean

Reduces sparks and cuts quickly

Voltage: AC100V, Frequency: 50/60Hz, Current: 6.9A,

Power consumption: 650 W

Rotational Speed: 4,200 per minute

For burring and chamfering pipes (inside and outside)

Compatible Sizes: 0.2 - 1.5 inches (4 - 38 mm)

Body Material: ABS

Blade Material: SAE1086

Comes with convenient scales

Maximum opening width: 1.4 inches (36 mm)

In narrow spaces, etc

Package weight: 0.24 kg

For grinding and chamfering wood, etc

Set Includes: Flat, semi-circle, round

Country of Origin: China

For flat sharpening, crimping and chamfering

Rated time: 30 minutes

For carving and fixing wood dimensions

Set Includes: Parallel ruler x 1, dust bag x 1, spanner x 1, hex wrench x 1

Voltage: AC 100V, Frequency: 50/60Hz, Current: 7.5A, Power Consumption: 700W

Rotational Speed: Approx. 16,000 rpm

Cutting Width: Approx. 3.2 inches (82 mm)

Cutting depth: Maximum approx. 0.06 inch (1.6 mm) (adjustable at 0.01 inch (0.2 mm) intervals)

Product Size (L x W x H): Approx. 11.8 x 6.5 x 6.8 inches (300 x 166 x 173 mm); Weight: Approx. 7.6 lbs (3

Cord Length: Approx. 6.6 ft (2 m)

Size: Approx. 4.3 x 1.8 x 6.1 inches (11.0 x 4.5 x 15.5 cm).

Weight: Approx. 8.9 oz (250 g).

Materials: Carbon tool steel, ABS resin.

Country of Origin: China.

Specifications: Voltage: 6V DC; Rotation speed: Approximately 210 rpm; Power source: 4 x AA batteries (sold separately).

Accessories: Tip bit set (5 bits), instruction manual (English language not guaranteed).

Battery-operated for easy use anywhere; Lightweight, compact and easy to handle; Magnetic chuck makes it easy to install bits; Switch between tightening and loosening.

Wide range of uses such as heat shrink packaging, paint drying and bending processing: For processing heat shrink tubes, bending boards and PVC pipes, contracting shrink film, drying thermoset paints and putty, removing paint, glue and seals, removing seals, carpets and scraping deep areas

(A wide variety of nozzle attachments that can be used for a wide range of uses, including a storage case for easy carrying) Set Contents: Main unit (HG-1450A) x 1, Wide nozzle x 1, Spot nozzle x 1, Hook nozzle x 1, Spatula nozzle x 1, Scraper fixing tool x 1, Storage case x 1, Instruction manual x 1

Voltage: AC 100 V, Frequency: 50/60 Hz, Current: (Weak Wind) 7.6 A, (Strong Wind) 14.6 A, Rated Power Consumption: (Weak Wind) 750 W, (Strong Wind) 1,450 W, Hot Air Temperature: (Weak Wind) Approx. 300 °C, (Strong Wind) Approx. 500 °C, Discharge Rate: (Low Wind) Approx. 3555555000 L/min (Strong wind) Approx. 245 L / min / 700 L/min, Air flow change (2 levels) weak / strong wind, body size (L x W x H): Approx. 9.6 x 3.1 x 7.7 inches (245 x 80 x 195 mm), cord length: approx. 6.6 ft (2.0 m), weight (main unit only): approx. 0.6 kg); Rated time: approx

Because it is controlled by a heater, the temperature of the hot air may vary depending on the amount of air and temperature

Country of Origin: China

For bonding work, fixing materials, etc

Maximum opening width: Approx. 3.9 inches (100 mm)

Leg depth: Approx. 5.7 inches (145 mm)

Includes protective cap

Protective cap can be removed if needed