Lead2Amazon

Country of Origin: Japan.

Even if you are a beginner, you can use these products correctly without using anything in the wrong order.The whole set is packaged in the correct order, right up to the finish.

Materials: Abrasives, petroleum solvents, surfactants.

Included Accessories: Custom sponge included.

This trial set can be used in a wide range of ways, from applying a finish after a paint repair, to removing small scratches.

Content: 2.7 fl oz (80 mL) x 3 types (liquid ingredients: abrasives, surfactants, petroleum solvents).

Format: Liquid.

Use this product to remove polishing marks from repaired paint, to remove rough deposits and car-wash scratches from painted surfaces, to remove stains and limescale, and to apply super mirror finishes to painted surfaces.

Product Number: LP-14

Volume: 8.1 fl oz (240 ml)

Additive Rate: 0.4 - 0.6%

Only for gasoline-powered vehicles

Double blend of high purity PEA and PIBA

Country of Origin: Taiwan

Set includes: Storage case, insert screwdriver, screw driver, rubber stick, rubber cement, chalk

Package Size: Approx. 7.9 x 7.1 x 2.6 inches (200 x 180 x 65 mm)

Style: -Single

Capacity: 33.8 fl oz (1,000 cc); Thickness: 0.03 inches (0.8 mm).

Refueling nozzle length: Approx. 7.9 inches (200 mm).

Product Size(Φ x H): Approx. 3.1 x 9.6 inches (80 x 245 mm), including cap.

[Materials] Body: Anodized aluminum; Cap: Aluminum die-cast; Refueling Nozzle Closure: Polyethylene; Refueling Nozzle Hose: PVC; Storage Bag: Non-woven fabric.

Comes with a storage bag that can be strapped onto a belt.

Weight: Approximately 5.8 oz (165 g) (including cap).

A 3-in-1 set of compounds for paint/substrate treatment and polishing.

Features: This set of mini-sized polishing agents includes a coarse grit compound for substrate treatment and rust removal, a fine grit compound for repairing scratches and polishing, and an ultrafine compound for creating a mirror finish.Using the fine and ultra-fine compounds in sequence gives a shiny finish to paint repairs.

Uses: For removing scratches, hard water spots and tar from your car’s paint job.For polishing and waxing your car after a paint touch-up.For cleaning painted metal surfaces on motorcycles and bicycles.For removing rust from camping, golfing, or skiing equipment.

Specifications: Coarse – Average Grain Size = 500 microns; Fine – Average Grain Size = 2 microns; Ultrafine – Average grain size = 1 micron. Each tube contains 0.8 fl oz (25 g).

Restores the natural luster and blackness. Long durability and full protection

Applicable area: All car tires and unpainted resin parts with grain finish

Target details: Compatible with all tires (white letters, etc.)

Abrasive Particles: No Compound Liquidity: Neutral

Contents: 3.4 fl oz (100 ml); Estimated number of uses: Approximately 24 tires

Country of Manufacture: Japan

Materials: Synthetic resin (acrylic), pigment, organic solvent

Volume: 10.1 fl oz (300

Application area: 0.9 - 1.4 [[M2]] (2 - 3 coats)

Color: White

Rust conversion agent that stops rust without removing it, just by applying directly to the rust.

When applied, red rust changes to a rust-resistant film and the film prevents the recurrence of rust.

You can also apply it over the top or a previous application.

Uses: For rusting iron products such as car body, door edges, steel wheels, motorcycles, bicycles, shutters, gate doors, etc.

Accessories: Cup/brush/instruction manual (English language not guaranteed).

Product Number: S-45

Contents: 1 sheet

Gently enhances gloss and gloss on painted surfaces

Target Details: For finishing wax and coating

Made with ultra-fine fiber

Simply attach the EM-234 jack helper and you can use the original panta jack in your car.

In addition, using your own electric impact or air impact makes it easier to jack up and down and turn the car jack into an electric jack.

No need to buy expensive tools.

Compatible Panta Jack: (1 piece / round type) Base Thickness: Up to 0.3 inches (8.5 mm), Hole Size: 0.4 inches (10 mm), (2 pieces / square type): Distance between nozzles: 0.6 inches (16.5 mm) and above, Hole Size: 0.4 inches (10 mm) and above.

Compatible models: Impact wrench with maximum torque of 200 Nm or higher (cannot be used with DC 12V power supply impact wrench).

Impact Wrench Side Bolt Size (Exterior): 0.8 inches (21 mm); Impact Wrench Side Socket Size (Inside): Insertion Angle (1/2 mm), 0.5 inch (12.7 mm); Panta Jack Side Bolt / Nut Size: 0.7 inch (17 mm), DC 12 V power supply impact wrench cannot be used. We recommend an impact wrench with a maximum torque of 200 N·m

Due to product improvements, you may receive products with a design that differs from the image shown.We appreciate your understanding.